D-Link DGS-3700 Parameter Description Server ID, Server IP Address, UDP Port, or Severity

	DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
Parameter		Description
Server ID		Syslog server settings index (1-4).
Server IP Address		The IP address of the Syslog server.
UDP Port		Type the UDP port number used for sending Syslog messages. The default is 514.
(514 or 6000-65535)
Severity		This drop-down menu allows you to select the level of messages that will be sent. The options
		are Warning, Informational, and All.
Facility		Some of the operating system daemons and processes have been assigned Facility values.
		Processes and daemons that have not been explicitly assigned a Facility may use any of the
		"local use" facilities or they may use the "user-level" Facility. Those Facilities that have been
		designated are shown in the following: Bold font indicates the facility values that the Switch is
		currently employing.
		Numerical	Facility Code	Numerical	Facility Code
		0	kernel messages	12	NTP subsystem
		1	user-level messages	13	log audit
		2	mail system	14	log alert
		3	system daemons	15	clock daemon
		4	security/authorization messages	16	local use 0	(local0)
		5	messages generated internally by	17	local use 1	(local1)
			syslog line printer subsystem	18	local use 2	(local2)
		7	network news subsystem	19	local use 3	(local3)
		8	UUCP subsystem	20	local use 4	(local4)
		9	clock daemon	21	local use 5	(local5)
		10	security/authorization messages	22	local use 6	(local6)
		11	FTP daemon	23	local use 7	(local7)
Status		Choose Enabled or Disabled to activate or deactivate.
To add a new entry, enter the appropriate information and click Apply.

21