
TimeZone Settings
The following window is used to configure time zones and Daylight Savings time settings for SNTP.
To view this window, click Configuration > SNTP Settings > TimeZone Settings as shown below:
Figure 2 - 42 Time Zone and DST Settings window
The following parameters can be set:
ParameterDescription
| Time Zone and DST |
|
|
Daylight Saving | Use this |
Time State |
|
|
|
Daylight Saving | Use this |
Time Offset in | 30, 60, 90, or 120 minutes. |
Minutes |
|
|
|
Time Zone Offset | Use these |
from GMT in +/- | Time (GMT.) |
HH:MM |
|
|
|
DST Repeating Settings
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second week of April and end DST on Sunday during the last week of October.
37