![](/images/new-backgrounds/1193073/193073451x1.webp)
Figure 6 - 42 CPU Access Rule Detail Information window for IP
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the CPU Access Profile List window and click Add/View Rules for an IPv6 entry. This will open the following window.
Figure 6 - 43 CPU Access Rule List window for IPv6
To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click the Add Rule button:
| Figure 6 - 44 Add Access Rule window for IPv6 |
|
To set the Access Rule for IPv6, adjust the following parameters and click Apply. |
| |
|
|
|
Parameter | Description |
|
|
|
|
Access ID | Enter a unique identifier number for this access. This value can be set from 1 to 100. |
|
|
|
|
Action | Select Permit to specify that the packets that match the access profile are forwarded by the |
|
| Switch, according to any additional rule added (see below). |
|
| Select Deny to specify the packets that match the access profile to be filtered. |
|
|
|
|
Class | Enter an IPv6 Class. The class can be between 0 – 255. |
|
|
|
|
Flow Label | Configuring this field, in hex form, will instruct the Switch to examine the flow label field of the |
|
| IPv6 header. This flow label field is used by a source to label sequences of packets such as non- |
|
215