DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
196
Figure 6 - 12 Access Profile Details (IPv4)
To return to the Access Profile List click Show All Profiles, to add a rule to a previously config ured entr y click on the
corresponding Add/View Rules, which will reveal the following window;
Figure 6 - 13 Access Profile (IPv4)
The following parameters may be configured for the IP (IPv4) filter.
Parameter Description
Access ID (1-128) Type in a unique identifier number for this access. T his value can be set from 1 to 128.
Action Select Permit to specify that the packets that match t he access prof ile are for warded by the
Switch, according to any additional rule added (see below).
Select Deny to specify the packets that match the access profile to be filter ed.
Select Mirror to specify that packets that match the access profile are mirrored to a port
defined in the config mirror port command. Port Mirroring m ust be enab led and a target p ort
must be set.
Priority (0-7) Enter a priority value if you want to re-write t he 802.1p default priority of a packet to the
value entered in the Priority field, which meets the criteria spec ified previously in this
command, before forwarding it on to the specified CoS queue. Otherwise, a pack et will h ave
its incoming 802.1p user priority re-written to its original value before being for warded b y the
Switch.
Replace Priority Enter a replace priority manually if you want to re-write the 802.1p def ault pr iority of a packet
to the value entered in the Priority field, which meets the c riteria specif ied previousl y in this
command, before forwarding it on to the specified CoS queue. Otherwise, a pac ket w ill hav e
its incoming 802.1p user priority re-written to its original value before being for warded b y the