DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

LACP Port Settings

The LACP Port Settings window is used to create port trunking groups on the Switch. Using the following window, the user may set which ports will be active and passive in processing and sending LACP control frames.

To view this window, click L2 Features > LACP Port Settings as shown below:

 

Figure 3 - 25 LACP Port Settings window

The following fields can be set

 

 

Parameter

Description

 

 

From Port / To Port

A consecutive group of ports may be configured starting with the selected port.

 

 

Activity

Active – Active LACP ports are capable of processing and sending LACP control frames. This

 

allows LACP compliant devices to negotiate the aggregated link so the group may be

 

changed dynamically as needs require. In order to utilize the ability to change an aggregated

 

port group, that is, to add or subtract ports from the group, at least one of the participating

 

devices must designate LACP ports as active. Both devices must support LACP.

 

Passive – LACP ports that are designated as passive cannot initially send LACP control

 

frames. In order to allow the linked port group to negotiate adjustments and make changes

 

dynamically, one end of the connection must have "active" LACP ports (see above).

 

 

Click Apply to implement changes made.

89

Page 100
Image 100
D-Link DGS-3700 user manual Lacp Port Settings, Activity