the 15th byte.
•
•
•
•
Click Apply to set this entry in the Switch’s memory.
To view the settings of a previously correctly created profile, click the corresponding Show Details button on the CPU Access Profile List window to view the following window:
Figure 6 - 36 CPU Access Profile Detail Information window for Packet Content To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for Ethernet, open the CPU Access Profile List window and click Add/View Rules for an Ethernet entry. This will open the following window.
Figure 6 - 37 CPU Access Rule List window for Ethernet
To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click the Add Rule button:
Figure 6 - 38 Add Access Rule window for Ethernet
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
Parameter Description
Access ID
212