Figure 3 - 81 CFM MIPCCM List window
Connectivity Fault Management Settings
This window is used to configure the CFM settings on the Switch.
To view this window, click L2 Features > CFM > Connectivity Fault Management Settings as shown below:
Figure 3 - 82 Connectivity Fault Management Settings window
The following parameters can be set or are displayed:
Parameter Description
CFM State | Used to Enable or Disable the CFM State. |
|
|
| Connectivity Fault Management Create(MD) |
MD | Enter the maintenance domain name you wish to create. |
|
|
Level | Enter the maintenance domain level. |
|
|
| Connectivity Fault Management Settings(MD) |
MD | Enter the maintenance domain name you wish to configure. |
|
|
| 125 |
