Figure 2 - 73 About window
Firmware Upgrade
This screen is used to upgrade firmware from the Commander Switch to the Member Switch. Member Switches will be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name and Version. To specify a certain Switch for firmware download, click its corresponding check box under the Port heading. To update the firmware, enter the Server IP Address where the firmware resides and enter the Path/Filename of the firmware. Click Download to initiate the file transfer.
To view this window, click Configuration > Single IP Management > Firmware Upgrade as shown below:
Figure 2 - 74 Firmware Upgrade window
Configuration File Backup/Restore
This screen is used to upgrade configuration files from the Commander Switch to the Member Switch using a TFTP server. Member Switches will be listed in the table and will be specified by ID, Port (port on the CS where the MS resides), MAC Address, Model Name and Firmware Version. To update the configuration file, enter the Server IP Address where the file resides and enter the Path/Filename of the configuration file. Click Restore to initiate the file transfer from a TFTP server to the Switch. Click Backup to backup the configuration file to a TFTP server.
To view this window, click Configuration > Single IP Management > Configuration File Backup/Restore as shown below:
Figure 2 - 75 Configuration File Backup/Restore window
60
