DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Port Mirror

The Switch allows you to copy frames transmitted and received on a port and redirect the copies to another port. You can attach a monitoring device to the mirrored port, such as a sniffer or an RMON probe, to view details about the packets passing through the first port. This is useful for network monitoring and troubleshooting purposes.

To view this window, click L2 Features > Port Mirror as shown below:

Figure 3 - 55 Port Mirror window

To configure a mirror port:

1.Change the status to Enabled.

2.Select the Source Port from where you want to the frames to come from.

3.Select the Target Port, which receives the copies from the source port.

4.Click Apply to let the changes take effect.

NOTE: You cannot mirror a fast port onto a slower port. For example, if you try to mirror the traffic from a 100 Mbps port onto a 10 Mbps port, this can cause throughput problems. The port you are copying frames from should always support an equal or lower speed than the port to which you are sending the copies. Also, the target port for the mirroring cannot be a member of a trunk group. Please note a target port and a source port cannot be the same port.

105

Page 116
Image 116
D-Link DGS-3700 user manual Port Mirror window