SNTP Settings
The Simple Network Time Protocol Settings can be configured in the next two windows.
Time Settings
This window is used to configure the time settings for the Switch.
To view this window, click Configuration > SNTP Settings > Time Settings as shown below:
Figure 2 - 41 Time Settings window
The following parameters can be set or are displayed:
Parameter | Description |
|
|
|
|
| Status |
|
SNTP State | Use the radius button to select an Enabled or Disabled SNTP state. |
|
Current Time | Displays the Current Time set on the Switch. |
|
Time Source | Displays the time source for the system. |
|
| SNTP Settings |
|
SNTP First Server | This is the IP address of the primary server the SNTP information will be taken from. |
|
SNTP Second Server | This is the IP address of the secondary server the SNTP information will be taken from. |
|
SNTP Poll Interval in | This is the interval, in seconds, between requests for updated SNTP information. |
|
Seconds |
|
|
| Set Current Time |
|
Date (DD/MM/YYYY) | Enter the current date in day, month and year to update the system clock. |
|
Time in (HH:MM:SS) | Enter the current time in hours, minutes, and seconds. |
|
Click Apply to implement changes made.
36
