DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
94
This table allows the user to configure the rate of IGMP snooping control packets that are allowed per port or VLAN.
To view this window, click L2 Features > IGMP Snooping > IGMP Snooping Rate Limit Settings as shown below:
Figure 3 - 31 IGMP Snooping Rate Limit Settings window
The following parameters can be configured:
Parameter Description
Port List Specifies a port or range of ports that will be configured.
VLAN List Specifies a VLA N or range of VLANs that will be configured.
Rate Limit (1-1000) Configures the rate of IGMP control packets that are allowed per port or VL AN.
Click Apply to implement changes made.
This table is used to configure the current IGMP snooping static group i nformation on the Switch.
To view this window, click L2 Features > IGMP Snooping > IGMP Snooping Static Group Settings as shown below:
Figure 3 - 32 IGMP Snooping Static Group Settings window
The following parameters can be configured:
Parameter Description
VLAN Name The name of the VLAN for which to create IGMP snooping static group information.
VLAN List The list of the VL AN IDs for which to create IGMP snooping static group information.
IPv4 Address The static group address for which to create IGMP snooping s tatic group information.
Click Apply to implement changes made. To search for an entry enter the appr opriate inform ation and click Find, to
remove and entry enter the appropriate information and click Delete.