DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Figure 2 - 60 Single IP Settings window (enabled)

The following parameters can be set:

Parameters

Description

 

 

SIM State

Use the pull-down menu to either enable or disable the SIM state on the Switch. Disabled will

 

render all SIM functions on the Switch inoperable.

 

 

Role State

Use the pull-down menu to change the SIM role of the Switch. The two choices are:

 

Candidate – A Candidate Switch (CaS) is not the member of a SIM group but is connected to a

 

Commander Switch. This is the default setting for the SIM role.

 

Commander – Choosing this parameter will make the Switch a Commander Switch (CS). The

 

user may join other switches to this Switch, over Ethernet, to be part of its SIM group. Choosing

 

this option will also enable the Switch to be configured for SIM.

 

 

Group Name

The user may enter a name for the group.

 

 

Discovery

The user may set the discovery protocol interval, in seconds that the Switch will send out

Interval (30-90)

discovery packets. Returning information to a Commander Switch will include information about

 

other switches connected to it. (Ex. MS, CaS). The user may set the Discovery Interval from 30

 

to 90 seconds.

 

 

Hold Time Count

This parameter may be set for the time, in seconds the Switch will hold information sent to it

(100-255)

from other switches, utilizing the Discovery Interval. The user may set the hold time from 100

 

to 255 seconds.

 

 

Click Apply to implement the settings.

After enabling the Switch to be a Commander Switch (CS), the added links to aid the user in configuring SIM through the Configuration Backup/Restore and Upload Log File.

Single IP Management folder will then contain four web, including Topology, Firmware Upgrade and

Topology

The Topology window will be used to configure and manage the Switch within the SIM group and requires Java script to function properly on your computer.

The Java Runtime Environment on your server should initiate and lead you to the topology window, as seen below.

53

Page 64
Image 64
D-Link DGS-3700 user manual Topology