DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
128
Ethernet OAM

Ethernet OAM Settings

This window is used to configure the ports Ethernet OAM mode. In Active mode the ports can initiate O AM discover y
and start or stop remote loopback. When a port in OAM enabled, an y change to the OA M mode will ca use the OAM
discovery to be restarted.
To view this window, click L2 Features > Ethernet OAM > Ethernet OAM Settings as shown below:
Figure 3 - 85 Ethernet OAM Settings window
The following parameters can be configured:
Parameter Description
From Port / To Port Specify a range of ports to be configured.
Mode Specify to operate in either Active mode or Passive mode The default mode is Active.
State Specify that the OAM function state is Enabled or Disabled. The default stat e is Disabled.
Remote Loopback Specify to Start or Stop the OAM remote loopback function.
Received Remote
Loopback Specify whether to Process or to Ignore the rec eived Ethernet OAM remote loopback
function. The default method is Ignore.
Click Apply to implement changes.