D-Link DGS-3700 user manual SSH Authmode and Algorithm Settings

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

security shell encryptions. The available options are Never, 10 min, 30 min, and 60 min. The default setting is Never.

Click Apply to implement changes made.

SSH Authmode and Algorithm Settings

The SSH Algorithm window allows the configuration of the desired types of SSH algorithms used for authentication encryption. There are four categories of algorithms listed and specific algorithms of each may be enabled or disabled by checking the boxes. All algorithms are enabled by default.

To view this window, click Security > SSH > SSH Authmode and Algorithm Settings as shown below:

	Figure 5 - 32 SSH Authmode and Algorithm Settings window
The following algorithms may be set:
Parameter	Description
	SSH Authentication Mode Settings
Password	This parameter may be enabled if the administrator wishes to use a locally configured
	password for authentication on the Switch. The default is enabled.
Public Key	This parameter may be enabled if the administrator wishes to use a public key configuration
	set on a SSH server, for authentication on the Switch. The default is enabled.
Host-based	This parameter may be enabled if the administrator wishes to use a host computer for
	authentication. This parameter is intended for Linux users requiring SSH authentication
	techniques and the host computer is running the Linux operating system with a SSH
	program previously installed. The default is enabled.
	Encryption Algorithm
3DES-CBC	Check the box to enable the Triple Data Encryption Standard encryption algorithm with
	Cipher Block Chaining. The default is enabled.
Blow-fish CBC	Check the box to enable the Blowfish encryption algorithm with Cipher Block Chaining. The
	default is enabled.
AES128-CBC	Check the box to enable the Advanced Encryption Standard AES128 encryption algorithm
	with Cipher Block Chaining. The default is enabled.
AES192-CBC	Check the box to enable the Advanced Encryption Standard AES192 encryption algorithm
	with Cipher Block Chaining. The default is enabled.
AES256-CBC	Check the box to enable the Advanced Encryption Standard AES-256 encryption algorithm
	with Cipher Block Chaining. The default is enabled.
ARC4	Check the box to enable the Arcfour encryption algorithm with Cipher Block Chaining. The
	default is enabled.
	169