D-Link DGS-3700 user manual Band Manage Settings, Class ID

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Figure 4 - 8 QoS Scheduling

The following parameters can be configured:

ParameterDescription

From Port / To Port	Enter the port or port list you wish to configure.
Class ID	Select the Class ID, from 0-7, to configure for the QoS parameters.
Scheduling	Strict – The highest class of service is the first to process traffic. That is, the highest class of
Mechanism	service will finish before other queues empty.
	Weight – Use the weighted round-robin (WRR) algorithm to handle packets in an even
	distribution in priority classes of service. When Weight is selected, a field appears next to this
	field for the user to specify the maximium number of packets. The specified hardware priority
	queue will be allowed to transmit before allowing the next lowest priority queue to transmit its
	packets. The value is ranged from 1 to 127.

Click Apply to implement changes made.

In Band Manage Settings

This window allows the user to specify a priority handling of untagged in-band management packets received by the Switch. The priority value entered in this window will be used to determine which of the eight hardware priority queues the packet is forwarded to.

To view this window, click QoS > In Band Manage Settings as shown below:

139