DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

802.1X User

To create a new 802.1X User enter a user name and password then reconfirm the password and click Apply, the new user will be displayed in the lower half of the table. To delete an entry click the corresponding Delete button.

To view this window, click Security > 802.1X > 802.1X User as shown below:

Figure 5 - 24 802.1X User window

Authentication RADIUS Server

The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection against a sniffing, active hacker.

To view this window, click Security > 802.1X > Authentication RADIUS Server as shown below:

 

Figure 5 - 25 Authentication RADIUS Server window

This window displays the following information:

 

 

Parameter

Description

 

 

Index

Choose the desired RADIUS server to configure: 1, 2 or 3.

 

 

IPv4 Address /

Select either IPv4 Address or IPv6 Address to set the RADIUS Server IP.

IPv6 Address

 

 

 

Authentication Port

Set the RADIUS authentication server(s) UDP port. The default port is 1812.

(1-65535)

 

Accounting Port

Set the RADIUS account server(s) UDP port. The default port is 1813.

(1-65535)

 

Timeout (1-255)

Enter the timeout value in seconds (1 to 255) the default value is 5.

 

 

Retransmit (1-255)

Set the retransmit value in seconds (1 to 255) the default value is 2.

 

 

Key

Set the key the same as that of the RADIUS server. Maximum length of the entry is 32

(Max:32 characters)

bytes.

 

162

Page 173
Image 173
D-Link DGS-3700 user manual 802.1X User, Authentication Radius Server