DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
236
PacketsDropped The number of RADIUS packets, which were received from this server on the
accounting port and dropped for some other reason.
Authenticator State
The following section describes the 802.1X Status on the Switch.
To view this window, click Monitoring > Port Access Control > Authenticator State as shown below:
Figure 7 - 20 Authenticator State window (for MAC-based 802.1X)
Figure 7 - 21 Authenticator State window (for Port-based 802.1X)
This window displays the Authenticator State for individual ports on a selec ted device. A polling inter val between 1s
and 60s seconds can be set using the drop-down menu at the top of the wind ow and clicking OK.
The information on this window is described as follows:
Parameter Description
MAC Address The MAC Address of the device of the corresponding index number .
Auth PAE State The Authenticator PAE State value can be: Initialize, Disconnected, Connecting, Authenticating,
Authenticated, Aborting, Held, Force_Auth, Force_Unauth, or N/A. N/A (No t Available) indicates
that the port's authenticator capability is disabled.
Backend State The Backend Authentication State can be Request, Response, Succes s, Fail, Timeout, Idle,
Initialize, or N/A. N/A (Not Available) indicates that the port's authentic ator capability is disabled.
Port Status Controlled Port Status can be Authorized, Unauthorized, or N/A.