D-Link DGS-3700 user manual MLD Snooping Multicast Vlan Settings, 1,6 Source Port

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Figure 3 - 47 MLD Multicast Group Profile Settings window

To configure the group list once a profile has been created, click on the hyperlinked Group List to reveal the following window:

Figure 3 - 48 Multicast Group Profile Multicast Address Settings window – Group List

Enter the Multicast Address List and click Add the new information will be displayed in the table. Click <<Back to return to the IGMP Multicast Group Profile Settings window and click Delete to remove an entry.

MLD Snooping Multicast VLAN Settings

This window is used to configure the MLD Snooping Multicast VLAN settings on the Switch.

To view this window, click L2 Features > MLD Snooping > MLD Snooping Multicast VLAN Settings as shown below:

Figure 3 - 49 MLD Snooping Multicast VLAN Settings window

The following fields can be set:

Parameter Description

VLAN Name	This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to
	modify the MLD Snooping Settings for.
VID (2-4094)	This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to
	modify the MLD Snooping Settings for.
State	Use the drop-down menu to toggle between Enabled and Disabled.
Replace Source IP	Enter an IP address that new IP address to be used.
Member Port	Select the ports that will be members of the Multicast VLAN. (Eg. Ports 1 to 4 and port 6)
(e.g.:1,6)
Source Port	Select the source Port for the Multicast VLAN.
(e.g.:1,6)
	102