D-Link DGS-3700 user manual Snmp User Table

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

SNMP User Table

This window displays all of the SNMP User's currently configured on the Switch and also allows you to add new users. To view this window, click Configuration > SNMP Settings > SNMP User Table as shown below:

	Figure 2 - 48 SNMP User Table window
The following parameters may be set:
Parameter	Description
User Name	An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
Group Name	This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version	V1 – Indicates that SNMP version 1 is in use.
	V2 – Indicates that SNMP version 2 is in use.
	V3 – Indicates that SNMP version 3 is in use.
SNMP V3 Encryption	None – Indicates that there is no SNMP V3 Encryption
	Password – Indicates that there is SNMP V3 Encryption through a password
	Key – Indicates that there is SNMP V3 Encryption through a key.
Auth-Protocol by	MD5 – Indicates that the HMAC-MD5-96 authentication level will be used.
Password	SHA – Indicates that the HMAC-SHA authentication protocol will be used.
Priv-Protocol by	None – Indicates that no authorization protocol is in use.
Password	DES – Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56)
	standard.
Auth-Protocol by Key	MD5 – Indicates that the HMAC-MD5-96 authentication level will be used.
	SHA – Indicates that the HMAC-SHA authentication protocol will be used.
Priv-Protocol by	None – Indicates that no authorization protocol is in use.
password	DES – Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56)
	standard.
	43