DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
45
SNMP Host Table
The SNMP Host Table window is used to set up SNMP trap recipients.
To view this window, click Configuration > SNMP Settings > SNMP Host Table as shown below:
Figure 2 - 50 SNMP Host Table window
The following parameters can set:
Parameter Description
Host IP Address Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
User-based Security
Model SNMPv1 – Specifies that SNMP version 1 will be used.
SNMPV2c – Specifies that SNMP version 2 will be used.
SNMPV3 – To specify that the SNMP version 3 will be used.
Security Level NoAuthNoPriv – To specify a NoAuthNoPriv security level.
AuthNoPriv – To specify an AuthNoPriv security level.
AuthPriv – To specify an AuthPriv security level.
Community String/
SNMP V3 User Name Type in the community string or SNMP V3 user n ame as appropriate.
To implement your new settings, click Apply.
SNMP v6Host Table
This window is used to specify the IPv6 host IP address to which the trap pac kets will be sent.
To view this window, click Configuration > SNMP Settings > SNMP v6Host Table as shown below:
Figure 2 - 51 SNMP V6Host Table window
The following parameters can be configured:
Parameter Description
Host Ipv6 Address Enter the IPv6 host IP address to which the trap packet will be sent.
User-
based Security
Model Used the drop down menu to select the user-based security model.
SNMPv1 – Specifies that SNMP version 1 will be used. The Simple Network Management
Protocol (SNMP) version 1, is a network management protocol that pro vides a means to