DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
29
Parameter Description
IP Address Enter the IP address of the interface.
Subnet Mask Enter the Subnet mask of the interface.
Gateway Enter the default gateway of the out of band management network s.
Status Allows the user to Enable or Disable the IP interface.
Link Status Displays the current configurations of the out of band management interfac e.
Click Apply to implement changes.
External Alarm Settings
This window is used to display and configure the messages receiving from the RJ -45 alarm port when ex ternal alarm
occurs. The alarm port is designed to collect the alarm message generated b y the 3-party alarm generat or. While
receiving the alarm messages, the Switch will send out alarm t raps to the NMS according to the message you
configured.
To view this window, click Configuration > External Alarm Settings as shown below:
Figure 2 - 28 External Alarm Settings window
To modify an existing message click the corresponding Edit button and retype the new Alarm Message as shown
below.
Figure 2 - 29 External Alarm Settings window Edit
Enter the new information and click Apply to implement changes made.
DHCP Auto Configuration Settings
The DHCP auto configuration function on the Switch will load a previ ously saved configuration file for c urrent use.
When DHCP auto configuration is Enabled o n the Switch, the DHCP reply will contain a configuration file and path
name. It will then request the file from the TFTP server specified in the re ply.
To view this window, click Configuration > DHCP Auto Configuration Settings as shown below:
Figure 2 - 30 DHCP Auto Configuration Settings window