DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
193
Precedence
header.
Time Range
Name Tick the check box and enter the name of the Time Range settings that has been prev iously
configured in the Time Range Settings window. This will set specific times when this access rule
will be implemented on the Switch.
Rx Rate (1-15624) Use this to limit Rx bandwidth for the profile being configured. T his r ate is im plemente d using the
following equation: 1 value = 64Kbit/sec. (ex. If the user selects an Rx rate of 10 t hen the ingres s
rate is 640Kbit/sec.) The user many select a value between 1 and 15624 or tick the No Limit
check box. The default setting is No Limit.
Counter Specifies whether counter feature will be enabled/disabled
This is optional, the default is disabled.
If the rule is not binded with flow_meter, then all packet matched will be c ountered.
If the rule is binded with flow_meter, then “counter” here will be overri ded.
Ports Specifies the access rule will take effect on one port or a range of ports.
VLAN Name Specifies the access rule will take effect on the VLAN Name specified.
VLAN ID Specifies the access rule will take effect on the VLAN ID specified.
Click Apply to display the following Access Rule List window.
Figure 6 - 8 Access Rule List (Ethernet)
To view the configurations for previously configured rules cl ick on the corres ponding Show Details Button which will
display the following Access Rule Details window.
Figure 6 - 9 Access Rule Detail Information (Ethernet)
To create an IPv4 ACL select IPv4, enter the Profile ID and Profi le Name into the top half of the scr een in the Add
ACL Profile window and click Select the following window will appear.