D-Link DGS-3700 user manual IPv4 Multicast Profile Settings

	DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
State	Use the drop-down menu to toggle between Enabled and Disabled.
Replace Source IP	Enter an IP address that new IP address to be used.
Member Port	Select the ports that will be members of the Multicast VLAN. (Eg. Ports 1 to 4 and port 6)
(e.g.:1-4,6)
Source Port	Select the source Port for the Multicast VLAN.
(e.g.:1-4,6)
Tagged Member	Select the ports that will be tagged as members of the VLAN.
Port (e.g.:1-4,6)

To modify an entry click the corresponding Modify, To edit and entry click the corresponding Edit button and to delete an entry click the corresponding Delete button.

IPv4 Multicast Profile Settings

The IPv4 Multicast Profile Settings window allows the user to add a profile to which multicast IPv4 address(es) reports are to be received on specified ports or VLANs on the Switch. This function will therefore limit the number of reports received and the number of multicast groups configured on the Switch. The user may set an IP Multicast address or range of IPv4 Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the specified switch ports or VLANs.

To view this window, click L2 Features > IGMP Snooping > IPv4 Multicast Profile Settings as shown below:

Figure 3 - 36 IPv4 Multicast Profile Settings window

The following fields can be set

Parameter Description

Profile ID	Use the drop-down menu to choose a Profile ID.
Profile Name	Enter a name for the IPv4 Multicast Profile.

To edit and entry click the corresponding Edit button and to delete an entry click the corresponding Delete button.

Figure 3 - 37 IPv4 Multicast Profile Settings – Edit window

To configure the Group List Settings click the hyperlinked Group List.

96