DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
48
sFlow
The sFlow folder contains four windows to enable and configure the sFlo w settings on the Switch.

sFlow Global State Settings

This table is used to enable or disable the sFlow Global State Settings on the Switch. The sFlow version, address and
state configurations can also be viewed in this table.
To view this window, click Configuration > sFlow > sFlow Global State Settings as shown below:
Figure 2 - 55 Time Range Settings window
Select Disabled or Enabled and click Apply.

sFlow Analyzer Server Settings

This window is used to configure the sFlow analyzer server settings. You can spec ify more than one ana lyzer server
with the same IP address but with different UDP port numbers. You c an have up to four uniq ue combinations of IP
address and UDP port numbers.
To view this window, click Configuration > sFlow > sFlow Analyzer Server Settings as shown below:
Figure 2 - 56 sFlow Analyzer Server Settings window
The following parameters can be configured:
Parameter Description
Analyzer Server ID (1-4) Up to four sFlow Analyzer Servers can be configured.
Owner Name The entity making use of this sflow analyzer server. W hen owner is set or modif ied, the