
Tagged Member Port (e.g.:1-4,6)
Select the ports that will be tagged as members of the VLAN.
To modify an entry click the corresponding Modify button. To remove an entry click the corresponding Delete button.
IPv6 Multicast Profile Settings
The IPv6 Multicast Profile Settings window allows the user to add a profile to which multicast IPv6 address(es) reports are to be received on specified ports or VLANs on the Switch. This function will therefore limit the number of reports received and the number of multicast groups configured on the Switch. The user may set an IP Multicast address or range of IPv6 Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the specified switch ports or VLANs.
To view this window, click L2 Features > MLD Snooping > IPv6 Multicast Profile Settings as shown below:
Figure 3 - 50 IPv6 Multicast Profile Settings window
The following fields can be set:
Parameter Description
Profile ID | Use the |
|
|
Profile Name | Enter a name for the IPv6 Multicast Profile. |
|
|
To edit an entry click the corresponding Edit button and to delete an entry, click the corresponding Delete button.
Figure 3 - 51 IPv6 Multicast Profile Settings – Edit window
To configure the Group List Settings click the hyperlinked Group List.
Figure 3 - 52 Multicast Address Group List Settings – Group List window
Enter the multicast Address List starting with the lowest in the range, and click Add. To return to the IP Multicast Profile Settings window, click the <<Back button.
103