D-Link DGS-3700 Port Configuration, Port Settings, Neighbor IPv6, Address Link Layer MAC

	DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
Parameter	Description
Interface Name	Enter the interface name of the IPv6 neighbor you wish to configure.
Neighbor IPv6	Enter the neighbor IPv6 address of the entry you wish to configure.
Address
Link Layer MAC	Enter the MAC address of the neighbor device to be added as an IPv6 neighbor on the IP
Address	interface.
Interface Name	In order to search for a previously configured Interface name enter the appropriate information
	and click Find. To remove a previously configured Interface enter the Interface name and click
	Clear.
State	To find or delete specific entries use the pull down menu to select All, Address, Static, or
	Dynamic.
	All – Select All to view all configured neighbor devices which are IPv6 neighbors of the IP
	interface previously created.
	Address – Select Address and enter the IPv6 address of the entry you wish to find.
	Static – Select Static to view all statically entered IPv6 neighbors on the Switch.
	Dynamic – Select Dynamic to view all dynamically configured neighbor devices which are IPv6
	neighbors of the IP interface previously created.

Click Add to add a new entry, click Find to search for a specific entry or click Clear to remove an entry.

Port Configuration

This section contains information for configuring various attributes and properties for individual physical ports, including port speed and flow control.

Port Settings

To view this window, click Configuration > Port Configuration > Port Settings as shown below:

To configure switch ports:

Choose the port or sequential range of ports using the From Port / To Port port pull-down menus. Use the remaining pull-down menus to configure the parameters described below:

Figure 2 - 11 Port Settings window

The following parameters can be configured:

14