NOTE: To set the Local Enable Password, see the next section, entitled
Local Enable Password.
To view the following table, click Security > Access Authentication Control > Enable Method Lists as shown below:
Figure 5 - 41 Enable Method List window
To delete an Enable Method List defined by the user, click the correspoinding Delete button. To modify an Enable Method List, click its corresponding Edit button.
To define an Enable Login Method List, set the following parameters and click Apply:
ParameterDescription
Method List Name | Enter a method list name defined by the user of up to 15 characters. |
|
|
Priority 1, 2, 3, 4 | The user may add one, or a combination of up to four of the following authentication |
| methods to this method list: |
| local_enable – Adding this parameter will require the user to be authenticated using the local |
| enable password database on the Switch. The user in the next section entitled Local Enable |
| Password must set the local enable password. |
| none – Adding this parameter will require no authentication to access the Switch. |
| radius – Adding this parameter will require the user to be authenticated using the RADIUS |
| protocol from a remote RADIUS server. |
| tacacs – Adding this parameter will require the user to be authenticated using the TACACS |
| protocol from a remote TACACS server. |
| xtacacs – Adding this parameter will require the user to be authenticated using the |
| XTACACS protocol from a remote XTACACS server. |
| tacacs+ – Adding this parameter will require the user to be authenticated using the TACACS |
| protocol from a remote TACACS server. |
| server_group – Adding a previously configured server group will require the user to be |
| authenticated using a |
|
|
Local Enable Password Settings
This window will configure the locally enabled password for the Enable Admin command. When a user chooses the "local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password configured here that is locally set on the Switch.
To view this window, click Security > Access Authentication Control > Local Enable Password Settings as shown below:
178
