DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
120
Port Description Use the drop-down menu to enable or disable port description.
System Name Use the drop-down menu to enable or disable system nam e.
System
Description Use the drop-down menu to enable or disable system description.
System
Capabilities Use the drop-down menu to enable or disable system capabiliti es.
Click Apply to implement changes made.
LLDP Dot1 TLVs Settings
LLDP Dot1 TLVs are organizationally specific TLVs which are defined in IEE E 802.1 and used to configure an
individual port or group of ports to exclude one or more of the IEEE 802.1 organizationa l port vlan ID T LV data t ypes
from outbound LLDP advertisements.
To view this window, click L2 Features > LLDP > LLDP Dot1 TLVs Settings as shown below:
Figure 3 - 70 LLDP Dot1 TLVs Settings window
The following parameters can be set:
Parameter Description
From Port / To Port Use the pull-down menu to select a range of ports to be configure d.
Dot1 TLV PVID Use the drop-down menu to enable or disable the advertised PVID. This TLV optional
datatype determines whether the IEEE 802.1 organizationally defined port VLAN TLV
transmission is allowed on a given LLDP transmission capable port.
Dot1 TLV Protocol
VLAN Use the drop-down menu to enable or disable the advertised Pr otocol VLAN ID. This TLV
optional data type indicates whether the corresponding Local System’s port and protocol
VLAN ID instance will be transmitted on the port. If a port is associated with multiple protocol
VLANs, those enabled ports and protocol VLAN IDs will be advertised.
Dot1 TLV VLAN Use the drop-down menu to enable or disable the advertised VLAN Nam e. This TLV opt ional
data type indicates whether the corresponding Local System’s VLAN name instance will b e
transmitted on the port. If a port is associated with multiple VLANs, those enabled VLAN name
will be advertised. Those enabled VLAN name will be adv ertised. If the numbers of VLANs are
larger, it will only bring limited numbers of VLANs due to restrictions of the package length.
Dot1 TLV Protocol
Identity Use the drop-down menu to enable or disable the advertised Protocol Identity. This TLV
optional data type indicates whether the corresponding Local System ’s Protocol Identity
instance will be transmitted on the port. The Protocol Identity TLV provides a wa y for stations
to advertise protocols that are important to the operation of the network. Such as Spanning