Copy Settings
Settings You Can Change with User Tools
This section is for the key operators in charge of this machine. You can change or set the machine's default settings.
Note
❒For how to enter the User Tools program, press the {Clear Modes/Energy Saver} key, and then press the {Clear/Stop} key for more than 3 seconds.
3 |
•Fusing Temperature
Note
❒0: Mode 1, 1: Mode 2, 2: Mode 3, 3: Mode 4, 4: Mode 5, 5: Mode 6, 6: Mode 7
❒Default: 2
❒For details about each mode, contact your service representative.
•Fusing Temperature
Note
❒0: Mode 5, 1: Mode 6, 2: Mode 7, 3: Mode 8
❒Default: 0
❒For details about each mode, contact your service representative.
•Fusing Temperature
Note
❒0: Mode 2, 1: Mode 3, 2: Mode 4, 3: Mode 5
❒Default: 1
❒For details about each mode, contact your service representative.
•Count Up/Down(+04): The copy counter can be made to count up or count down.
Note
❒0: Count up, 1: Count down
40
