11.{Function Select} key
Press to change which setting you are ed- iting. The current selection is shown by the indicators above the key:
•Paper Length
•Leading Edge
•Copy Counter
Also used for copying a selected portion of the original.
12.{+} and
Press to increase the value being edited. Press to decrease the value being edited.
13.Leading Edge/Copy Counter in- dicator
Displays the margin settings and the number of copies made.
14.Roll Feeder indicator
Light up when you select Roll Feeder 1 or 2.
15.{RF Select/Cut} key
Use to select the paper feed type (when the Roll Feeder option is installed). Also press to stop a copy job.
16.{Copy Media} key
Press to select the type of copy paper you are using.
The copier will apply more or less heat accordingly.
•The top
•The bottom
17.{Emergency Stop} key
Press to stop the copying process imme- diately.
Use if your original is getting stuck in the copier.
If you stop operation by pressing this key, remove both the original and paper.
18.Density indicator and {i}, {j}keys
Shows the density level the copies will have.
Press the left key to make copies lighter. Press the right key to make copies darker.
19.{Paper Feed}key
Press to feed the paper.
Paper Feed indicator(LED) lights up when the machine is ready to feed roll paper.
20.{Clear/Stop} key
When entering numbers, press to cancel. While copying, press to stop copying.
4
