Savin 7800W, 7700W operating instructions Settings You Can Change with User Tools

Models: 7800W 7700W

1 90
Download 90 pages 32.25 Kb
Page 51
Image 51

Settings You Can Change with User Tools

Default: 0

Beeper On/Off(+05): The beeper can be turned off completely; turned off for setting the margin, multiple copies, and paper length; or left on to emit a tone whenever a key is pressed.

Note

0: On, 1: All Off, 2: Partially Off

Default: 2(The beeper does not work if you use leading edge margin.)

Paper Feed Out Waiting Time Setting(+06): When the copier is ready to re- ceive the original, it will wait for a preset length of time. If no original is set

within this time, the copier will process the copy paper without copying. The

 

3

time can be set to 1, 2, 3, 4, or 5 minutes.

 

Note

0: 2min, 1: 1min, 2: 3min, 3: 4min, 4: 5 min

Default: 0

Manual Feed Start Time Setting(+07): After the copy paper is set, the copier waits for a preset number of seconds before starting the rollers that will pull the paper in. This pause gives you a chance to align the paper. The time can be set to 0.7, 1, 2, 3, 4, or 5 seconds.

Note

0: 2.0sec, 1: 0.7sec, 2: 1.0sec, 3: 3.0sec, 4: 4.0sec, 5: 5.0sec

Default: 0

Lead Edge Increase/Decrease Speed Setting(+08): The speed at which the lead edge setting scrolls up or down can be changed. The time for one incre- ment (or decrement) can be set to 0.02, 0.05, 0.10, 0.25, or 0.5 seconds.

Note

0: 0.10 sec, 1: 0.50 sec, 2: 0.25 sec, 3: 0.05 sec, 4: 0.02 sec

Default: 0

Auto Reset Time Setting(+09): If the copier is idle for a while, it will clear it- self. The time needed can be set to 1, 2, 3, 4, or 5 minutes. This function can also be turned off.

Note

0: 2 min, 1: 1min, 2: 3 min, 3: 4 min, 4: 5 min, 5: None

Default: 0

The machine cannot enter the Auto reset mode if the roll end indicator lights while copying repeatedly.

The machine cannot enter the Auto clear if the toner end indicator lights.

41

Page 51
Image 51
Savin 7800W, 7700W operating instructions Settings You Can Change with User Tools