Setting a Leading Edge Margin

You can set a margin at the leading edge of the copy.

Leading Edge

Margin

Using the Copy Paper Table, or in the Preset Cut mode, Variable cut mode

Leading Edge Margin

In the Semi Synchro Cut mode

Note

❒You can set up to a ± 99mm, ± 4.0" margin in 1mm, 0.1" steps at the leading edge.

❒The copy image is shifted to the trailing edge, when you make a copy using the bypass table, or in the Preset Cut mode or Variable Cut mode.

❒In the Semi Synchro Cut mode, the paper length is increased by the leading margin width.

A Press the {Function Select} key until the Leading Edge indicator is lit.

Press the {+} key and {− } key to specify an edge margin. To zero the value, press the {Clear/Stop} key.

Insert the original from the leading edge.

You can get same results using the Rear Table.