Copy Settings
Adjusting the Fusing Temperature Manually
A Press the {Copy Media} key to turn on the Translucent or Film indicator that you want.
3 |
B Hold down the {Copy Media} key for 3 seconds until beep. The indicator show the current fusing temperature. The unlit indicator shows the current temperature settings.
C Press the {i} key to decrease the temperature, and press the {j} key to increase the temperature. The number of temperature levels (7 levels) available depends on the paper type:
• Plain paper : 1234567 |
•Translucent paper: 1234
•Film : 1234
D After you have finished setting the temperature, press the {Copy Media} key. E Choose any copy settings you require, and then start copying.
Note
❒The new fusing temperature for the selected paper type is cleared when you press the {Clear Modes/Energy Saver} key or turn off the main switch.
28
