Savin 7700W, 7800W operating instructions Where to Put Your Copier, Machine Environment

Troubleshooting

Where to Put Your Copier

Your copier should be installed by a qualified technician. If you need to trans- port your copier to a distant location, call your service center before the move.

You can of course move your copier around your office without calling the serv- ice center. If you do, remember that the temperature, humidity, and cleanliness of the area around the copier may affect its performance. Choose the new loca- tion with care and follow the guidelines below.

Machine Environment

Your machine's location should be carefully chosen because environmental con- ditions greatly affect its performance.

Optimal Environmental Conditions

5

R CAUTION:

• Keep the machine away from humidity and dust. A fire or an elec- tric shock might occur.

• Do not place the machine on an unstable or tilted surface. If it top- ples over, it could cause injury.

RCAUTION:

•If you use the machine in a confined space, make sure there is a continuous air turnover.

•Temperature: 50° to 86°F (15° to 30°C)

•Humidity: 20 to 80% RH

•To avoid possible ozone build-up make sure to install this copier in a large, well ventilated room ensuring an air turnover of at least 1000 ft3/hour/per- son (30 m3). When you use this machine for a long time in a confined space without good ventilation, you may notice an odd smell. To keep the work- space comfortable, we recommend that you keep it well ventilated.

•Set your copier on a strong and level base. The copier must be level within a quarter of an inch (5 mm) left to right and half an inch (10 mm) front to rear.

Environments to Avoid

•Locations exposed to direct sunlight or strong light (more than 1500 lux)

•Dusty areas

•Areas with corrosive gasses

•Altitudes of over 6500 feet (2000 m)

74