NetComm V90 manual Phone Settings, Tools

Models: V90

1 28
Download 28 pages 54.53 Kb
Page 15
Image 15

Phone Settings

Setting the LCD Default display

You can set up the phone LCD to display two lines of customize text during idle condition.

To set the Vendor Name (title) and Title on LCD (subtitle):

On the Phone Settings screen under Configurations menu, enter the text for these two fields as desired. If the title field is not filled, the phone will display the phone number assigned by default.

Auto Dial

When enabled, the V90 will automatically dial the numbers that it has received so far after the auto dial period has elapsed. To disabled this feature, click on Disable on the Auto Dial Menu. The default Auto dial is enabled with the Auto Dial Timeout of 5 seconds.

Missed Call LED Indication

By default, the phone LED will flash to indicate that there is a missed call. To disable this feature, tick Disable on Missed Call LED Indication menu.

Menu Configuration Password

By default, the phone prompts for a username and password to enter into the Device Config sub menu (Press Menu, Device Config). To disable this feature, tick Disable on the Menu Configuration Password option.

Tools

Performing an Online Upgrade

WARNING! Performing an online upgrade is for experienced users or network administrators only! To prepare the V90 VoIP Phone for online upgrade:

1.Click Tools on the left menu and then Online Upgrade.

2.Enter the IP address or domain name of the upgrade server and package name (e.g. http://202.44.167.165/V90Upgrade/V90S-3.08-9.pkg).

3.Click Start.

4.The message below appears when the firmware upgrade is completed. Click OK to continue.

“Ugrade successful!” “Current version: xxxxxxxxx”

WARNING!!! Do not disconnect any cables or close the web browser until the “Rebooting, Please Wait…” message appears.

Notes: The unit can also be upgraded via FTP or TFTP server. Please follow the instructions above and use the respective address for the FTP or TFTP Server.

Changing password of the unit

To change the unit password, click on Tools and then Change Password. Enter the new password and click on Change.

YML871 Rev1

V90 VoIP Phone User Guide

www.netcomm.com.au

15

Page 15
Image 15
NetComm V90 manual Phone Settings, Tools