Reset Configuration Settings

If you would like to reset the V90 VoIP Phone to factory default settings, click on Tools and then Reset Config button. Press OK in the dialog box to confirm the reset. Please remember to use the default password to access the phone again.

Note: This will reset the entire phone configuration back to factory settings. Please note that all settings in Phone Book will be erased as well.

Note: Another way to reset the unit is by pressing *09987654 on the phone keypad while the handset is in on-hook state.

System Reboot

If you would like to reboot the V90 VoIP phone, click on Tools and then Reboot. Press OK in the dialog box to confirm the reboot. The phone will then reboot automatically.

V90 VoIP Phone User Guide

YML871Rev1

16

www.netcomm.com.au

Page 16
Image 16
NetComm V90 manual Reset Configuration Settings, System Reboot