Chapter 3 More Configurations
Preference
Changing the Time Zone
The SIP Phone uses Network Time Protocol (NTP) to retrieve date and time information from an NTP server. The time is in GMT ± offset. For example, Australian Eastern Standard Time is GMT +10.
To change the Time Zone:
On the Preferences screen under Configurations menu, enter GMT+x where x is the time difference between your time zone and GMT.
Identifying the Time Server
The Time Server is the Network Time Protocol server where the V90 Phone retrieves date and time information.
To specify the Time Server:
On the Preference screen under Configurations, enter the IP address or the domain name (FQDN) of a valid Time Server in the Time Server field (e.g. timekeeper.isi.edu. The default value is pool.ntp.org.
Auto Provision and Central Management
To disable the auto provisioning, click Disable on the
To enable Central management, click Enable on the Central Management menu and type in the password in the Password field. Default is disabled.
Disable # as Delimiter key
By default, the # key will act as a delimiter key. To disable # key as the delimiter key, change the Key (#) menu to as Dial Digits.
Phone Book Mode
The V90 phone supports two types of Phone Book system.
1.Global. All profile/contact use the one phone book.
2.By Line. Each profile or contact has separate phone book entries. And all entries in each phone book can only be used by the corresponding profile/contact.
On the Preference screen under Configurations menu, select the phone book system you want to use from the Phone Book Mode drop down menu.
Selecting Network Tones
To set the Network Tone:
On the Preference screen under Configurations menu, select a country on the list beside the label Network Tones.
YML871 Rev1 | V90 VoIP Phone User Guide |
www.netcomm.com.au | 11 |
