D-Link DGS-3700 user manual Authenticator Diagnostics

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

The user may select the desired time interval to update the statistics, between 1s and 60s, where “s” stands for seconds. The default value is one second.

The following fields can be viewed:

Parameter	Description
Port	The identification number assigned to the Port by the System in which the Port resides.
Octets Rx	The number of octets received in user data frames on this port during the session.
Octets Tx	The number of octets transmitted in user data frames on this port during the session.
Frames Rx	The number of user data frames received on this port during the session.
Frames Tx	The number of user data frames transmitted on this port during the session.
ID	A unique identifier for the session, in the form of a printable ASCII string of at least three
	characters.
Authentic Method	The authentication method used to establish the session. Valid Authentic Methods include:
	(1) Remote Authentication Server – The Authentication Server is external to the Authenticator’s
	System.
	(2) Local Authentication Server – The Authentication Server is located within the Authenticator’s
	System.
Time	The duration of the session in seconds.
Terminate Cause	The reason for the session termination. There are eight possible reasons for termination.
	1)	Supplicant Logoff
	2)	Port Failure
	3)	Supplicant Restart
	4)	Reauthentication Failure
	5)	AuthControlledPortControl set to ForceUnauthorized
	6)	Port re-initialization
	7)	Port Administratively Disabled
	8)	Not Terminated Yet
UserName	The User-Name representing the identity of the Supplicant PAE.

Authenticator Diagnostics

This window contains the diagnostic information regarding the operation of the Authenticator associated with each port. An entry appears in this table for each port that supports the Authenticator function.

To view this window, click Monitoring > Port Access Control > Authenticator Diagnostics as shown below:

239