Toshiba SATELLITE E105 - page 87

3 Diagnostic Programs 3.2 Quick Start
20 Satellite E100 Maintenance Manual
 Test Mode: TIMEBOUND or LOOPBOUND, e.g. LOOPBOUND in the above
screen;
 Script File Name: Script file name, e.g. ‘Custom.INI’ in the above screen;
 Current Time(C. TIME): Current system time, e.g. ‘C.TIME:2008-02-16 0
in the above screen;
0:42:40’
t the same location as Current TIME (C. TIME) in the above
screen;
planning to execute and the current LOOP number have been finished, e.g.
‘COUNT: 01/01’ in the above screen;
: 46%’;
t
de. The default mode is Sequential Test Mode, it would
displays ‘ORDER: SEQ’ as in the above screen;
t, e.g. ‘S.TIME: 2008-02-16 00:42:28’ in the above screen;
 Manual Interrupt Method: Display ‘Esc: Break’ to tell the user how to manually
 Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the
remaining test time a
 Current Loop Count: In LOOPBOUND mode, it will display the total LOOP
number
 CPU Temperature: Detect the temperature in the current CPU, e.g. ‘CPU: 56C’ in
the above screen;
 Remaining Battery Capacity: Remaining Battery Capacity detected in the current
Battery, e.g. ‘BAT
 Test Order: Define the test sequence. There is two sequence modes: Sequential Tes
Mode and Random Test Mo
 LOG File Name: Display the file name of the test log, e.g. Custom.Log in the above
screen;
 Start Test Time (S.TIME): Display the test start time for the current test item or the
test scrip
 Break On Error: Display ‘HALT’ as shown in the above screen when ‘Break On
Error’ is enabled;
 Wait On Error: Display ‘WAIT’ as shown in the above screen when ‘Wait On
Error’ is enabled;
 Pause Enable: Display ‘PAUSE’ when “Pause Enable” is enabled;
interrupt the test process.