Error! Style not defined. Error! Style not defined. | 4 Replacement Procedures |
4.3Optional Memory
Removing the Optional Memory
Remove the optional memory (module) according to the following procedures and Figures 4- 7, after checking that the computer is turned off in boot mode.
CAUTION: Remove the optional memory after turning off the computer. If this is violated, the computer or memory can be damaged.
CAUTION: Do not touch the connectors on the memory modules or in the computer. Contaminated connectors can cause memory access problems.
Stopper
Memory slot
Slot B
Memory module
Slot A
Figure 4-7 Removing the optional memory
1.Spread out the two memory lock latches so that the memory module pops up.
2.Pull the memory module up and out at an angle, using care to avoid touching the connectors
CAUTION: The slot A is reserved for main memory. Use the slot B for expanded memory. If only one card is installed, use the slot A
Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual |
