4.13 System board 4 Replacement Procedures

4.13 System Board

Removing the System Board.
NOTE: Be careful of the eject button for the PC card. It can be damaged when
removing the board. Make sure it is securely installed.
Remove the System Board according to the following procedures and Figure 4-26.
1. Release four M2.5x4 white flat head screws on the system board.
2. Release three M2.5x4 white hexagonal screws on the system board.
3. Release two M2x4 black flat head screws securing the Mini card.
4. Disconnect FM card cable from CN17.
5. Disconnect DC IN cable from CN6.
6. Remove the system board.
CN17
CN2003
FM card flat cable
M2x4 black flat haed screw
M2 5x4 white hexagonal bolt.
M2 5x4 white hexagonal bolt.
M2x4 black flat head screw
Figure 4-26 Removing the system board
Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual 4-37