3 Diagnostic Programs 3.2 Quick Start
3.2.10 System Information
This function is used to read the system information. When the test is completed, a
file named System.log will be saved in the defined location. During the reading
process, the following screen will be displayed to indicate that the progress is in
detection:
On the left column of the above screen, the detected hardware components are listed.
The corresponding information of the detected hardware components is displayed on
the right of the screen. It displays the current running status information of the check
program. The name of the program is marked on the top of the screen. At the bottom,
the function keys are listed for user operation. During the detection, keyboard
operation is invalid.
When the detection is finished, the hardware components information will be
displayed as follows:
16
Satellite E100 Maintenance Manual