4.17 LCD Module

4 Replacement Procedures

4.17 LCD Modules

NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module.

NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or regulations.

NOTE: The LCD/FL cable must be carefully peeled away before disconnecting it from the module.

Removing the 15.1-inch LCD module

Remove the 15.1-inch LCD module according to the following procedures and Figures 4- 30, 4-31, 4-32.

1.Remove two M2.5x5 black flat head screws on the LCD top cover.

2.Remove the LCD module.

3.Turn the LCD upside down. Be sure to place it on a cushioned surface such as a foam pad.

4.Remove the tape and LCD/FL cable connector. Then disconnect the LCD/FL cable.

Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual

4-45

Page 188
Image 188
Toshiba SATELLITE E105 manual LCD Modules, LCD Module Replacement Procedures