4 Replacement Procedures | 4.1 General |
Removing the Battery Pack
Remove the battery pack according to the following procedures and Figure
CAUTION: When handling the battery packs, use care not to short circuit the terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up their casing.
1.Turn the computer upside down so that the back is facing you.
2.Slide out the battery lock.
3.Slide the battery release latch and remove the battery pack from the computer.
Battery pack
Battery lock
Battery release latch
Figure 4-1 Removing the battery pack
Battry pack
Figure 4-2Removing the battery pack
NOTE: Dispose of the used battery packs as required by local ordinances or regulations.
Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual |
