3 Diagnostic Programs 3.2 Quick Start
3. Test Result
System will automatically run and display the test result as follows:
Following is the comparison report of the two testing methods mentioned above:
1) Configuration and Running
As to the method used in Mouse test, the user is required to select test items by
pressing Space key and set the parameters artificially, (See 3.3.3 Item’s Parameters
Configuration) Then press F8 to start the test. User should configure each parameter
in advance; otherwise the default parameters would be used. Using this method, user
is allowed to select more than one test item at one time.
2) Running the current test item
6
Satellite E100 Maintenance Manual