4 Replacement Procedures 4.7 Error! Style not defined.

4.7 ODD Bay Module

Removing the ODD Bay Module
NOTE: The installation and removal procedures are the same for all the modules that
can be installed in the ODD bay. See the appropriate sections for the disassembly
procedures of specific modules.
Remove the ODD bay module according to the following procedures and Figures 4-13.
1. Remove the M2x4 black flat head screw.
2. Push out on the ODD bay module in the direction of the arrow.
CAUTION: Handle the ODD bay module carefully it can become hot during operation.
M2x4 black flat head screw
ODD bay module
Figure 4-13 Removing the ODD bay module
Installing ODD Bay Module
Install the ODD bay module according to the following procedures and Figures 4-13.
1. Place the ODD bay module in the correct position and slide it in.
2. Push it in until it clicks into place.
3. Secure the ODD bay module with one M2x4 black flat head screw.
4-24 Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual