4 Replacement Procedures Error! Style not defined. FAN
4.9 FAN
Removing the FAN
Remove the FAN according to the following procedures and Figures 4-17.
1. Disconnect the FAN cable from CN2.
FAN
CN2
M2x5 white flat head screw
Figure 4-17 Removing the FAN
2. Remove three M2x5 white flat head screws on the FAN
3. Remove the FAN.
Installing the FAN
Install the FAN according to the following procedures and Figures 4-17.
1. Seat the FAN in to correct position.
2. Connect the FAN cable to CN2.
3. Secure the FAN with three M2x5 white flat head screws on the FAN.
4-28 Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual