3.6 Memory Test 3 Diagnostic Programs
In addition to the above pattern test of the memory, there is Read/Write Cycle test
and Read Cycle Test for the extended memory.
Below is the parameter dialog window of the extended pattern test.
Test Range: Specify the test coverage range of Extended Memory. If user
chooses Total Size, it means that the whole Extended Memory will be
tested. Although user can input the parameter into other select box, but the
selected result is invalid. If user chooses Special Size, the test of Extended
Memory will be taken according to the coverage range that user chooses or
time.
Extended Memory Start Address and Extended Memory End Address
(MB): Set the range of extended memory that is to be tested. The test
coverage will be according to the value setting in ‘Percent (%)’ mentioned
at below.
Percent (%): Choose the percentage of the defined range of the memory to
be tested.
Time Limit(h): Choose or Input the time (hour) of the defined range of the
memory to be tested;
Time Limit(m): Choose or Input the time (minute) of the defined range of
the memory to be tested.
1. Write/Read Cycle Test
Test by using both read and write instructions.
Satellite E100 Maintenance Manual
43