Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual 4-31
Install the cooling Module according to the following procedures and Figures 4-18, 4-19, 4-
20, 4-21.
CAUTION: When installing the cooling module, keep the following in mind:
1. Be sure to confirm the correct position for the module.
2. Secure the relevant screws on the main board according to the number sequence sealed
on the heat sink module.
NOTE: Apply silicon grease with a special syringe to cover the surface of the CPU chip
completely.
1. If silicon grease is already applied to the CPU, wipe it off with a cloth.
By using a special syringe, apply silicon grease G7762 to the CPU chip center so that
the entire CPU chip is covered with the grease G7762.
2. Install the CPU cooling module into the correct position in the computer.
3. Seat the CPU bracket in the correct position.
4. Secure CPU bracket with two black flat head screws.
Seat the CPU cooling module and bracket in the correct position and secure them with
two M2x4 black flat head screws.