3.2 Quick Start 3 Diagnostic Programs
3.2.6 Audio Record Test
Check whether the system could record the sound normally. If there is no error
during the whole test, Pass; otherwise Fail. The test will repeat for four times. When
the test is completed, a file named autest.log will be saved in the defined location.
3.2.7 DMI Read
Read the information from the system’s SMBIOS and display it in the screen as
follows
User can press any key to exit the program.
3.2.8 DMI Write
In addition to reading the DMI information, DMI Write also permits attributes
editing and updating: Manufacture, Product Name, Version, Serial Number, and
OEM Part Number, etc. The following screen will be displayed:
In this screen, there are two lines which attribute could be edited and updated. The 1st
line (the font in yellow with blue background) shows the attribute’s value that is read
from the current system and the 2nd line (the font in red with turquoise background)
shows the same value as that in the 1st line before user’s editing. User can modify the
attribute’s value in the 2nd line and press Enter to confirm the current edition and
continue editing the next attribute.
Satellite E100 Maintenance Manual
9